2023 Hyundai Construction Equipment Z-Bar And XT Wheel Loaders HL970A XT

Information

2023 Hyundai Construction Equipment Z-Bar And XT Wheel Loaders HL970A XT

Hyundai HL900 series wheel loaders deliver maximum performance, productivity, and efficiency. An important feature of the new A-Series machines is the use of Cummins Performance Series engines that comply with the international Stage 5 emissions-control standard. Combined with the engineering and product design expertise of Hyundai, these engines will deliver substantial performance gains from a smaller, lighter power package. Customers will experience more than a 10-percent increase in power and a nearly 20-percent increase in torque compared to previous engines, all while using less fuel.

Add a long list of Hyundai innovations – including an accurate onboard weighing system, unique bucket design for better load retention, and free use of Hyundai’s Hi-Mate cellular-based remote management system for five years – and you’ll find the HL900 A series offers unbeatable value.

Features may include:

RELIABILITY
  • Hyundai construction equipment is precision designed with trusted and proven components and systems from leading OEM’s. The HL970A XT is designed to be rugged and reliable for longer up time, reduced operating cost and improved productivity.
DURABILITY
  • Hyundai construction equipment is manufactured with the highest grade of steel due to Hyundai’s dominance in the steel and shipbuilding industries. Rigid cycle testing, heat testing, vibration testing, and shock load testing is conducted in the design and manufacturing process of all new models insuring optimum durability and reliability.
  • Hyundai’s improved bucket design features an innovative wider opening, curved side plates, and enhanced spill guard to maximize bucket capacity and reduce material loss when traveling. Durability is enhanced through the use of wear-resistant HARDOX 400 grade steel in key structural areas of the bucket.

Photos

Highlights

  • Brandon, Manitoba
  • 2023
  • Hyundai Construction Equipment
  • Z-Bar And XT Wheel Loaders HL970A XT
  • Torque Converter: 3-Elements, Single-stage, Single phase
  • Available
  • Over Tires (Unloaded): 2,980 mm (9' 9'') | Tread: 2,300 mm (7' 7'')
  • to Top of Exhaust Pipe: 3,570 mm (11' 9") | to Top of Cabin: 3,590 mm (11' 9") | to Top of Product Link Antenna: 3,665 mm (12' 0") | to Top of Warning Beacon: 3,720 mm (12' 2") | Hinge Pin at Maximum Lift: 4,815 mm (15' 10") | Hinge Pin at Carry Position: 615 mm (2' 0")

Specifications

  • 2023
  • Hyundai Construction Equipment
  • Z-Bar And XT Wheel Loaders
  • HL970A XT
  • Compact
  • CUMMINS / L9
  • Gross Power (SAE J1995): 325 HP (242 kW) at 2,100 rpm | Net Power (SAE J1349): 322 HP (240 kW) at 2,100 rpm | Max. Power: 330 HP (246 kW) at 2,000 rpm
  • diesel engine with No Manual Regeneration.
  • Tier 4F/ Stage V Emission Certified
  • No. of cylinders bore X stroke: Lift: 2-165 × 780 mm (2-6.5" × 2' 6.7") | HL970A XT Tilt: 1-180 × 570 mm (1-7.1" × 1' 10.4")
  • (SAE J1995): 1,207 lb.ft (1636 N·m) at 1,100 rpm
  • 8.9 l (543 cu in)
  • Torque Converter: 3-Elements, Single-stage, Single phase
  • 210 bar (3,046 psi)
  • Type Load sensing hydrostatic articulated steering
  • Hydraulically actuated, wet disc brakes actuate all 4 wheels independent axle-by-axle system. Self adjusting & wheel speed brake. | Travel: Four-wheel, Outboard, wet-disc type, full hydraulic | Emergency: When brake oil pressure drops, indicator light alerts operator and parking brake automatically applies
  • Spring-applied, hydraulically released brake
  • 40°
  • 40°
  • Type Tubeless, loader design tires
  • Standard: 26.5R25, L3
  • Standard: 26.5R25, L3
  • Max. drawball pull: 11,400 kgf (25,100 lbf)
  • Swing: 9.7 rpm
  • Forward: 1st: 7.4 (4.6) - 7.4 (4.6) | 2nd: 12.5 (7.8) - 12.6 (7.8) | 3rd: 27.8 (17.3) - 20.1 (12.5) | 4th: 40.0 (24.9) - 28.7 (17.8) 5th - 40.0 (24.9) | Reverse: 1st: 7.4 (4.6) - 7.4 (4.6) | 2nd: 12.5 (7.8) - 12.6 (7.8) | 3rd: 27.8 (17.3) - 28.7 (17.8)
  • Four-wheel drive system
  • Operator sound pressure (ISO 6396:2008): 70 dB(A) | Exterior sound power (ISO 6395:2008): 107 dB(A
  • Load sensing hydraulic system
  • Variable displacement piston pump 359 lpm | Steering: Variable displacement piston pump, 242 lpm
  • 280 bar (4,061 psi) | Steering: 210 bar (3,046 psi)
  • Raise: 6.0 Sec. / Dump: 1.5 Sec. | Lower: 4.3 Sec. / Total: 11.8 Sec
  • Steering: Center-point frame articulation. Tilt and telescopic steering column. | Mount: Rigid front axle and oscillating rear axle | Front Axle: Fixed | Rear Axle Oscillation: Oscillating ±11°degrees | Hub Reduction: Planetary reduction at wheel end | Diferential: Conventional | Reduction Ratio: 24.666 | Control valve: 2 spool (Bucket, Boom) / 3 spool (Bucket, Boom, Aux)
  • Lift Arm Clearance at Maximum Lift: 4,095 mm (13' 5'') | Dump Clearance at Maximum Lift and 45° Discharge: 3,570 mm (11' 9'') | Reach at Maximum Lift and 45° Discharge: 1,255 mm (4' 1') | Dump Angle at Maximum Lift and Dump (on Stops): (50°) | Roll Back Angle Ground: (43°) / Carry (49°) | Clearance Circle (Diameter) to Outside of Tires: 12,885 mm (42' 3'') | Clearance Circle (Diameter) to Inside of Tires: 6,800 mm (22' 4'')
  • 480 mm (1' 7")
  • 3,300 mm (10' 10")
  • (Without Bucket): 7,425 mm (24' 4'')
  • Shipping (With Bucket Level on Ground): 9,280 mm (30' 5")
  • (with bucket): 2,740 mm (9'))
  • Over Tires (Unloaded): 2,980 mm (9' 9'') | Tread: 2,300 mm (7' 7'')
  • to Top of Exhaust Pipe: 3,570 mm (11' 9") | to Top of Cabin: 3,590 mm (11' 9") | to Top of Product Link Antenna: 3,665 mm (12' 0") | to Top of Warning Beacon: 3,720 mm (12' 2") | Hinge Pin at Maximum Lift: 4,815 mm (15' 10") | Hinge Pin at Carry Position: 615 mm (2' 0")
  • tank: 365 liters (96.4 US gal)
  • engine: 47 liters (12.4 US gal)
  • engine: 23.7 L (6.3 gal)
  • 42 liters (11.1 US gal)
  • 42 liters (11.1 US gal)
  • tank: 152 liters (40.2 US gal) | System: 276 liters (72.9 US gal) | DEF Tank: 44.5 liters (11.8 US gal) | Crankcase: 22.7 liters (6.0 US gal) | Transmission: 53 liters (14 US gal)
  • Heaped: 4.20 m3 (5.50 yd3 ) | Struck: 3.60 m3 (4.70 yd3 )
  • Tipping: Straight: 16,250 kg (35,830 lb) | Full Turn: 13,950 kg (30,755 lb)
  • Operating: 25,002 kg (55,120 lb) | Breakout force-bucket: 21,775 kg (48,010 lb)