2023 Hyundai Construction Equipment Z-Bar And XT Wheel Loaders HL965

Information

2023 Hyundai Construction Equipment Z-Bar And XT Wheel Loaders HL965

Hyundai HL900 series wheel loaders deliver maximum performance, productivity and efficiency, and have been proven to deliver as much as 5-percent greater productivity and 10-percent lower fuel consumption than previous models. Add a long list of Hyundai innovations – including an accurate onboard weighing system, unique bucket design for better load retention, and free use of Hyundai’s Hi-Mate remote management system for three years – and you’ll find the HL900 series offers unbeatable value.

Features may include:

RELIABILITY
  • Hyundai construction equipment is precision designed with trusted and proven components and systems from leading OEM’s. The HL960 is designed to be rugged and reliable for longer up time, reduced operating cost and improved productivity.
DURABILITY
  • Hyundai construction equipment is manufactured with the highest grade of steel due to Hyundai’s dominance in the steel and shipbuilding industries. Rigid cycle testing, heat testing, vibration testing and shock load testing is conducted in the design and manufacturing process of all new models insuring optimum durability and reliability.

Photos

Highlights

  • Brandon, Manitoba
  • 2023
  • Hyundai Construction Equipment
  • Z-Bar And XT Wheel Loaders HL965
  • Torque Converter: 3-element, single-stage, single-phase
  • Available
  • Bucket pivot max.: 4,145 mm (13' 7") | Over exhaust: 3,375 mm (11' 0.9") | over cab: 3,450 mm (11' 3.9") | Dumping clearance at max. and 45° dump angle: 2,955 mm (9' 8.3")

Specifications

  • 2023
  • Hyundai Construction Equipment
  • Z-Bar And XT Wheel Loaders
  • HL965
  • Compact
  • Cummins / QSL9
  • Gross power: 272 HP (200 kW) / 2,100 rpm | Net power: 269 HP (198 kW) / 2,100 rpm
  • Water-cooled, 4-cycle, turbocharged charge air-cooled, direct-injection, electronically controlled diesel engine
  • Tier 4F/ Stage V Emission Certified
  • No. of cylinders bore X stroke: Lift: 2-140 mm (5.5") x 785 mm (30.9") | Tilt: 160 mm (6.3") x 560 mm (22")
  • 17.8:1
  • 148 Kg.m (1,070 lbs.ft) / 1,400 rpm
  • 8.9 l (543 in3 )
  • Dry, two-stage dual elements
  • Torque Converter: 3-element, single-stage, single-phase
  • 250 kgf/cm2 (3,555 psi)
  • Type Load sensing hydrostatic articulated steering
  • Hydraulically actuated, wet disc brakes actuate all 4 wheels independent axle-by-axle system. Self adjusting & wheel speed brake. | Travel: Four-wheel, Outboard, wet-disc type, full hydraulic | Emergency: When brake oil pressure drops, indicator light alerts operator and parking brake automatically applies
  • Spring-applied, hydraulically released brake
  • 40°
  • 40°
  • Type Tubeless, loader design tires
  • Standard: 23.5 R25, L3
  • Standard: 23.5 R25, L3
  • 2 x 12 V – 160 Ah, 900 CCA
  • 24 V - 95A
  • 24 V-7.85 kW
  • Max. drawball pull: 11,400 kgf (25,100 lbf)
  • Swing: 9.7 rpm
  • Forward km/h (mph): 1st: 6.0 (3.7) - 6.3 (3.9) / 2nd: 11.4 (7.1) - 11.1 (6.9) / 3rd: 22.9 (14.2) - 17.1 (10.6) / 4th: 37.4 (23.2) - 26.6 (16.5) / 5th: – 40.0 (24.9) | Reverse: 1st: 6.3 (3.9) - 6.7 (4.2) / 2nd: 12.0 (7.5) - 11.7 (7.3) / 3rd: 24.2 (15.0) - 28.0 (17.4)
  • Four-wheel drive system
  • Operator sound pressure (ISO 6396:2008): 68 dB(A) | Exterior sound power (ISO 6395:2008): 1028dB(A
  • Load-sensing hydraulic system | Steering: Load-sensing hydrostatic articulated steering
  • Variable-displacement piston pump, 249 l/min (66 gpm) | Steering: Variable-displacement piston pump, 115 l/min (30 gpm)
  • 280 kgf/cm2 (3,983 psi) | Steering: 250 kgf/cm2 (3,556 psi)
  • Raise: 5.8 sec | Dump: 1.4 sec | Lower: 3.1 sec | Total: 10.3 sec
  • Steering: Center-point frame articulation. Tilt and telescopic steering column. | Mount: Rigid front axle and oscillating rear axle | Front Axle: Fixed | Rear Axle Oscillation: ±12° of center pin-loaded | Hub Reduction: Planetary reduction at wheel end | Diferential: Hydraulic lock (front) / conventional (rear) | Reduction Ratio: 27.0 | Control valve: 2 spool (Bucket, Boom) / 3 spool (Bucket, Boom, Aux)
  • Front overhang: 2,900 mm (9' 6.1") | Rollback angle on ground: 42° / at carry: 47° | Dump angle: 50° | Clearance circle, over bucket (carry position): 13,580 mm (44' 6.6") | Clearance circle, outside of tires: 6,530 mm (21' 5") | Clearance circle, inside of tires: 6,510 mm (21' 4.3") | Reach Full lift: 1,400 mm (4' 7.1") / 2,134 mm (7 feet): 1,920 (6' 3.6") | Digging depth: 90 mm (0.3")
  • 114 mm (4.49")
  • 145 mm (5.69")
  • 410 mm (1' 4.1")
  • 3,300 mm (10' 9.9")
  • Overall length on ground: 8,280 mm (27' 2") / at carry: 8,195 mm (26' 10.6")
  • with bucket: 3,000 mm (9' 10.1") | without bucket: 2,770 mm (9' 1.1")
  • (Fully raised): 5,700 mm (18' 8.4")
  • Bucket pivot max.: 4,145 mm (13' 7") | Over exhaust: 3,375 mm (11' 0.9") | over cab: 3,450 mm (11' 3.9") | Dumping clearance at max. and 45° dump angle: 2,955 mm (9' 8.3")
  • tank: 300 l (79.3 US gal)
  • engine: 44 l (11.6 US gal)
  • 42 l (11.1 US gal)
  • 40 l (10.6 US gal)
  • tank: 115 l (30.4 US gal) | System: 215 l (56.8 US gal) | DEF Tank: 27 l (7.1 gal) | Crankcase: 19 l (5.0 US gal) | Transmission: 33 l (8.7 Us gal)
  • Heaped: 3.6 m3 (4.7 yd3) | Struck: 3.1 m3 (4.0 yd3) | Earth/clay: 1.5~1.7 tons / m3 (2,528~2,865 lb / yd3 ) | Sand and gravel: 1.5~1.7 tons / m3 (2,528~2,865 lb / yd3 ) | Aggregate 25~76 mm (1" to 3"): 1.6~1.7 tons / m3 (2,697~2,865 lb / yd3 ) | 19 mm (3") and larger: 1.8 tons / m3 (3,034 lb / yd3 )
  • Tipping: Straight: 16,155 kg (35,615 lbs) | Full Turn: 13,975 kg (30,810 lbs)
  • Operating: 20,730 kg (45,700 lbs) | Breakout force-bucket: 17,400 kg (38,360 lbs)