2023 Hyundai Construction Equipment Z-Bar And XT Wheel Loaders HL960A HDXT

Information

2023 Hyundai Construction Equipment Z-Bar And XT Wheel Loaders HL960A HDXT

Hyundai HL900 series wheel loaders deliver maximum performance, productivity and efficiency, and have been proven to deliver as much as 5-percent greater productivity and 10-percent lower fuel consumption than previous models. Add a long list of Hyundai innovations – including an accurate onboard weighing system, unique bucket design for better load retention, and free use of Hyundai’s Hi MATE cellular based remote management system for five years – and you’ll find the HL900 series offers unbeatable value.

Features may include:

RELIABILITY
  • Hyundai construction equipment is precision designed with trusted and proven components and systems from leading OEM’s. The HL960 is designed to be rugged and reliable for longer up time, reduced operating cost and improved productivity.
DURABILITY
  • Hyundai construction equipment is manufactured with the highest grade of steel due to Hyundai’s dominance in the steel and shipbuilding industries. Rigid cycle testing, heat testing, vibration testing and shock load testing is conducted in the design and manufacturing process of all new models insuring optimum durability and reliability.

Photos

Highlights

  • Brandon, Manitoba
  • 2023
  • Hyundai Construction Equipment
  • Z-Bar And XT Wheel Loaders HL960A HDXT
  • Torque Converter: 3-element, single-stage, single-phase
  • Available
  • Bucket pivot max.: 4,535 mm (14' 10.5") | Over exhaust: 3,360 mm (11' 0.3") | over cab: 3,450 mm (11' 3.8") | Dumping clearance at max. and 45° dump angle: 3,365 mm (11' 0")

Specifications

  • 2023
  • Hyundai Construction Equipment
  • Z-Bar And XT Wheel Loaders
  • HL960A HDXT
  • Compact
  • CUMMINS / QSB6.7
  • Gross power: 225 HP (168 kW) / 2,200 rpm | Net power: 222 HP (166 kW) / 2,200 rpm
  • Water-cooled, 4-cycle, turbocharged air-cooled, direct-injection, electronically controlled diesel engine
  • Tier 4F/ Stage V Emission Certified
  • No. of cylinders bore X stroke: Lift: 2-140 mm (5.5") x 765 mm (30.1") | Tilt: 1-160 mm (6.3") x 530 mm (20.9")
  • 17.3: 1
  • 106 kg·m (770 lb·ft) / 1,500 rpm
  • 6.7 l (408 in3 )
  • Dry, 2-stage dual elements
  • Torque Converter: 3-element, single-stage, single-phase
  • 210 kgf/cm2 (2,987 psi)
  • Type Load sensing hydrostatic articulated steering
  • Hydraulically actuated, wet disc brakes actuate all 4 wheels independent axle-by-axle system. Self adjusting & wheel speed brake. | Travel: Four-wheel, Outboard, wet-disc type, full hydraulic | Emergency: When brake oil pressure drops, indicator light alerts operator and parking brake automatically applies
  • Spring-applied, hydraulically released brake
  • 40°
  • 40°
  • Type Tubeless, loader design tires
  • Standard: 23.5 R25, L3
  • Standard: 23.5 R25, L3
  • 2 x 12 V – 160 Ah, 900 CCA
  • 24 V - 95 Amp
  • 24 V - 7.8 kW
  • Max. drawball pull: 11,400 kgf (25,100 lbf)
  • Swing: 9.7 rpm
  • Forward km/h (mph): 1st: 6.3 (3.9) - 6.6 (4.1) / 2nd: 11.9 (7.4) - 11.6 (7.2) / 3rd: 24 (14.9) - 17.9 (11.1) / 4th: 38.9 (24.2) - 27.9 (17.3) / 5th: - 40.0 (24.9) | Reverse: 1st:6.6 (4.1) - 7.1 (4.4) / 2nd: 12.6 (7.8) - 12.3 (7.6) / 3rd: 25.3 (15.7) - 29.4 (18.3)
  • Four-wheel drive system
  • Operator sound pressure (ISO 6396:2008): 68 dB(A) | Exterior sound power (ISO 6395:2008): 1028dB(A
  • Load-sensing hydraulic system
  • Variable-displacement piston pump, 246 l/min (65 gpm) | Steering: Variable-displacement piston pump, 120 l/min (32 gpm)
  • 280 kgf/cm2 (3,983 psi) | Steering: 250 kgf/cm2 (3,556 psi)
  • Raise: 5.9 sec | Dump: 1.3 sec | Lower: 3.1 sec | Total: 10.3 sec
  • Steering: Center-point frame articulation. Tilt and telescopic steering column. | Mount: Rigid front axle and oscillating rear axle | Front Axle: Fixed | Rear Axle Oscillation: ±11° center pin-loaded | Hub Reduction: Planetary reduction at wheel end | Diferential: Hydraulic lock (front) / conventional (rear) | Reduction Ratio: 23.680 | Control valve: 2 spool (Bucket, Boom) / 3 spool (Bucket, Boom, Aux)
  • Front overhang: 3,275 mm (10' 9") | Rollback angle on ground: 42° / at carry: 48° | Dump angle: 50° | Clearance circle, over bucket (carry position): 13,860 mm (45' 6") | Clearance circle, outside of tires: 12,050 mm (39' 6") | Clearance circle, inside of tires: 6,510 mm (21' 4.3") | Reach Full lift: 1,380 mm (4' 6") / 2,134 mm (7 feet): 2,230 mm (7' 4") | Digging depth: 145 mm (5.7")
  • 107 mm (4.21")
  • 124 mm (4.88")
  • 410 mm (1' 4.1")
  • 3,300 mm (10' 9.9")
  • Overall length on ground: 8,695 mm (28' 6") / at carry: 8,530 mm (27' 11.5")
  • with bucket: 2,900 mm (9' 6.2") | without bucket: 2,770 mm (9' 1.1")
  • (Fully raised): 6,070 mm (19' 11")
  • Bucket pivot max.: 4,535 mm (14' 10.5") | Over exhaust: 3,360 mm (11' 0.3") | over cab: 3,450 mm (11' 3.8") | Dumping clearance at max. and 45° dump angle: 3,365 mm (11' 0")
  • tank: 300 l (79.3 gal)
  • engine: 42 l (11.1 gal)
  • 42 l (11.1 gal)
  • 40 l (10.6 gal)
  • tank: 110 l (29.1 gal) | System: 200 l (52.8 gal)| DEF Tank: 27 l (7.1 gal) | Crankcase: 18.0 l (4.8 gal) | Transmission: 33 l (8.7 gal)
  • Heaped: 3.3 m3 (4.3 yd3) | Struck: 2.9 m3 (3.8 yd3) | Earth/clay: 1.5~1.7 tons / m3 (2,528~2,865 lb / yd3 ) | Sand and gravel: 1.5~1.7 tons / m3 (2,528~2,865 lb / yd3 ) | Aggregate 25~76 mm (1" to 3"): 1.6~1.7 tons / m3 (2,697~2,865 lb / yd3 ) | 19 mm (3") and larger: 1.8 tons / m3 (3,034 lb / yd3 )
  • Tipping: Straight: 12,985 kg (28,625 lbs) | Full Turn: 11,145 kg (24,570 lbs)
  • Operating: 20,760 kg (45,770 lbs) | Breakout force-bucket: 16,430 kg (36,220 lbs)