2023 Hyundai Construction Equipment Z-Bar And XT Wheel Loaders HL940A

Information

2023 Hyundai Construction Equipment Z-Bar And XT Wheel Loaders HL940A

Hyundai HL900 series wheel loaders deliver maximum performance, productivity, and efficiency. An important feature of the new A-Series machines is the use of Cummins Performance Series engines that comply with the international Stage 5 emissions-control standard. Combined with the engineering and product design expertise of Hyundai, these engines will deliver substantial performance gains from a smaller, lighter power package. Customers will experience more than a 10-percent increase in power and a nearly 20-percent increase in torque compared to previous engines, all while using less fuel.

Add a long list of Hyundai innovations – including an accurate onboard weighing system, unique bucket design for better load retention, and free use of Hyundai’s Hi-Mate cellular-based remote management system for five years – and you’ll find the HL900 A series offers unbeatable value.

Features may include:

RELIABILITY
  • Hyundai construction equipment is precision designed with trusted and proven components and systems from leading OEM’s. The HL940A is designed to be rugged and reliable for longer up time, reduced operating cost and improved productivity.
DURABILITY
  • Hyundai construction equipment is manufactured with the highest grade of steel due to Hyundai’s dominance in the steel and shipbuilding industries. Rigid cycle testing, heat testing, vibration testing, and shock load testing is conducted in the design and manufacturing process of all new models insuring optimum durability and reliability.
  • Hyundai’s improved bucket design features an innovative wider opening, curved side plates, and enhanced spill guard to maximize bucket capacity and reduce material loss when traveling. Durability is enhanced through the use of wear-resistant HARDOX 400 grade steel in key structural areas of the bucket.

Photos

Highlights

  • Brandon, Manitoba
  • 2023
  • Hyundai Construction Equipment
  • Z-Bar And XT Wheel Loaders HL940A
  • Torque Converter: 3-Elements, Single-stage, Single phase
  • Available
  • Over Tires (Unloaded): 2,450 mm (8') | Tread: 1,930 mm (6' 4")
  • to Top of Exhaust Pipe: 3,310 mm (10' 10") | to Top of Cabin: 3,310 mm (10' 10") | to Top of Product Link Antenna: 3,445 mm (11' 4") | to Top of Warning Beacon: 1 3,430 mm (11' 3") | Hinge Pin at Maximum Lift: 11' 11" (3,640 mm)

Specifications

  • 2023
  • Hyundai Construction Equipment
  • Z-Bar And XT Wheel Loaders
  • HL940A
  • Compact
  • CUMMINS / B4.5
  • Gross Power: 156 HP (116 kW) at 2,200 rpm | Net Power: 154 HP (115 kW) at 2,200 rpm | Max. Power: 165 HP (123 kW) at 1,800 rpm
  • 4 cylinder diesel engine with No Manual Regeneration.
  • Tier 4F/ Stage V Emission Certified
  • No. of cylinders bore X stroke: Lift: 2-110 × 738 mm (4.3" × 29") | HL940A Tilt: 125 × 560 mm (4.9" × 1' 10")
  • 17.3: 1
  • 550 lbft (746 N·m) at 1,300 rpm
  • 6.7 L (408 cu in)
  • Torque Converter: 3-Elements, Single-stage, Single phase
  • 210 bar (3,046 psi)
  • Type Load sensing hydrostatic articulated steering
  • Hydraulically actuated, wet disc brakes actuate all 4 wheels independent axle-by-axle system. Self adjusting & wheel speed brake. | Travel: Four-wheel, Outboard, wet-disc type, full hydraulic | Emergency: When brake oil pressure drops, indicator light alerts operator and parking brake automatically applies
  • Spring-applied, hydraulically released brake
  • 40°
  • 40°
  • Type Tubeless, loader design tires
  • Standard: 20.5 R25, L3
  • Standard: 20.5 R25, L3
  • Max. drawball pull: 11,400 kgf (25,100 lbf)
  • Swing: 9.7 rpm
  • Forward: 1st: 7.0 (4.3) 2nd: 12.8 (7.9) 3rd: 25.1 (15.6) 4th: 40.0 (24.9) | Reverse: 1st: 7.4 (4.6) 2nd:13.5 (8.4) 3rd: 26.4 (16.4
  • Four-wheel drive system
  • Operator sound pressure (ISO 6396:2008): 68 dB(A) | Exterior sound power (ISO 6395:2008): 1028dB(A
  • Load sensing hydraulic system
  • Variable displacement piston pump, 149 lpm
  • Variable displacement piston pump, 34.9 gpm (132 lpm)
  • 4,061 psi (280 bar) | Steering: 210 bar (3,046 psi) | 3rd Function Auxiliary Flow Rated: 427 psi (30 kgf/cm2
  • Raise: 5.5 sec, Dump: 1.9 sec | Lower: 3.9 sec, Total: 11.3 sec
  • Steering: Center-point frame articulation. Tilt and telescopic steering column. | Mount: Rigid front axle and oscillating rear axle | Front Axle: Fixed | Rear Axle Oscillation: Oscillating ±11°degrees | Hub Reduction: Planetary reduction at wheel end | Diferential: Conventional | Reduction Ratio: 21.533 | Control valve: 2 spool (Bucket, Boom) / 3 spool (Bucket, Boom, Aux)
  • Hinge Pin Height at Carry Position: 430 mm (1' 5'') | Lift Arm Clearance at Maximum Lift: 3,820 mm (12' 6'') | Dump Clearance at Maximum Lift and 45° Discharge: 2,765 mm (9' 1'') | Reach at Maximum Lift and 45° Discharge: 1,095 mm (3' 7'') | Dump Angle at Maximum Lift and Dump (on Stops): (48°) | Roll Back Angle Ground: (42°) | Carry (47°) | Clearance Circle (Diameter) to Outside of Tires: 10,910 mm (35' 10") | Clearance Circle (Diameter) to Inside of Tires: 5,910 mm (19' 5")
  • 417 mm (1' 4.4")
  • 3,000 mm (9' 10")
  • (Without Bucket): 6,430 mm (21' 1'')
  • Shipping (With Bucket Level on Ground): 7,600 mm (24' 11'')
  • (with bucket): 2600 mm (8' 6")
  • Over Tires (Unloaded): 2,450 mm (8') | Tread: 1,930 mm (6' 4")
  • to Top of Exhaust Pipe: 3,310 mm (10' 10") | to Top of Cabin: 3,310 mm (10' 10") | to Top of Product Link Antenna: 3,445 mm (11' 4") | to Top of Warning Beacon: 1 3,430 mm (11' 3") | Hinge Pin at Maximum Lift: 11' 11" (3,640 mm)
  • tank: 220.0 liters (58 US gal)
  • engine: 37.0 liters (9.8 US gal)
  • engine: 23.7 L (6.3 gal)
  • 23.0 liters (6.1 US gal)
  • 23.0 liters (6.1 US gal)
  • tank: 90.0 liters (23.8 US gal) | System: 130.0 liters (34.3 US gal) | DEF Tank: 30.1 liters (8.0 US gal) | Crankcase: 18.0 liters (4.8 US gal) | Transmission: 34.7 liters (9.2 US gal)
  • Heaped: 2.3 m3 (3.0 yd3 ) | Struck: 2.0 m3 (2.62 yd3 )
  • Tipping: Straight: 10,471 kg (23,085 lb) | Full Turn: 9,003 kg (19,850 lb)
  • Operating: 13,601 kg (29,985 lb) | Breakout force-bucket: 11,800 kg (26,015 lb)