2023 Hyundai Construction Equipment Z-Bar And XT Wheel Loaders HL930A
- Year 2023
- Make Hyundai Construction Equipment
- Model Z-Bar And XT Wheel Loaders
2023 Hyundai Construction Equipment Z-Bar And XT Wheel Loaders HL930A
2023 Hyundai Construction Equipment Z-Bar And XT Wheel Loaders HL930A
Hyundai HL900 series wheel loaders deliver maximum performance, productivity, and efficiency. An important feature of the new A-Series machines is the use of Cummins Performance Series engines that comply with the international Stage 5 emissions-control standard. Combined with the engineering and product design expertise of Hyundai, these engines will deliver substantial performance gains from a smaller, lighter power package. Customers will experience more than a 10-percent increase in power and a nearly 20-percent increase in torque compared to previous engines, all while using less fuel.
Add a long list of Hyundai innovations – including an accurate onboard weighing system, unique bucket design for better load retention, and free use of Hyundai’s Hi-Mate cellular-based remote management system for five years – and you’ll find the HL900 A series offers unbeatable value.
Features may include:
RELIABILITY- Hyundai construction equipment is precision designed with trusted and proven components and systems from leading OEM’s. The HL930A is designed to be rugged and reliable for longer up time, reduced operating cost and improved productivity.
- Hyundai construction equipment is manufactured with the highest grade of steel due to Hyundai’s dominance in the steel and shipbuilding industries. Rigid cycle testing, heat testing, vibration testing, and shock load testing is conducted in the design and manufacturing process of all new models insuring optimum durability and reliability.
- Hyundai’s improved bucket design features an innovative wider opening, curved side plates, and enhanced spill guard to maximize bucket capacity and reduce material loss when traveling. Durability is enhanced through the use of wear-resistant HARDOX 400 grade steel in key structural areas of the bucket.
Engine
Engine Manufacturer
CUMMINS / B4.5
Engine Power
Gross Power: 133 hp (99 kW) @ 2,200 rpm | Net Power: 130 hp (97 kW) @ 2,200 rpm | Max. Power: 133 hp (99 kW) @ 2,200 rpm
Engine Type
4 cylinder diesel engine with No Manual Regeneration. | Throtle: Electric, dial type
Emissions
Tier 4F/ Stage V Emission Certified
Cylinder Liners
4 cylinders in line
Compression Ratio
17.3: 1
Engine Torque, Maximum
4.5 l(275 cu in)
Displacement
Piston: 3,400 cc (207 in3 )
Drivetrain
Transmission
Torque Converter: Type Single-stage, single-phase
Relief Valve Setting
3,046 psi (210 bar)
Steering
Type Load sensing hydrostatic articulated steering
Cylinder Liners
Double acting: 2.4" X 1' 4"mm (2-60 X 412)
Brakes
Brake System Type
Hydraulically actuated, wet disc brakes actuate all 4 wheels independent axle-by-axle system. Self adjusting & wheel speed brake. | Travel: Four-wheel, Outboard, wet-disc type, full hydraulic | Emergency: When brake oil pressure drops, indicator light alerts operator and parking brake automatically applies
Parking Brake
Spring-applied, hydraulically released brake
Steering Angle, Left
40°
Steering Angle, Right
40°
Wheels & Tires
Wheels
Type Tubeless, loader design tires
Tires, Front Specification
Standard: 17.5 R25, L3
Tires, Rear Specification
Standard: 17.5 R25, L3
Battery
Battery
2 × 12 V × 100 Ah
Electric
Starter
24 V - 7.8 kW
Alternator
Brushless (24V-95 Amp)
Operational
Operating Conditions
Max. drawball pull: 11,400 kgf (25,100 lbf)
Operating Speed
Swing: 9.7 rpm
Top Speed
Forward: 1st: 4.3 (6.9) 2nd: 7.9 (12.7) 3rd: 15.5 (24.9) 4th: 24.9 (40.4) | Reverse: 1st: 4.5 (7.3) 2nd: 8.3 (13.4) 3rd: 16.2 (24.9)
Drive System
Four-wheel drive system
Performance
Noise Level
Operator sound pressure (ISO 6396:2008): 70 dB(A) | Exterior sound power (ISO 6395:2008): 102 dB(A
Hydraulics
Hydraulic Type
Load sensing hydraulic system
Hydraulic Pump
Variable displacement piston pump, 34.9 gpm (132 lpm)
Hydraulic Flow
3rd Function Auxiliary Flow Rated: 35.9 gpm (136l/min)
Maximum Pressure
3,980 psi (274 bar) | Operating: 3,980 psi (280 kgf/cm2 ) @ 2,230 rpm | 3rd Function Auxiliary Flow Rated: 427 psi (30 kgf/cm2
Cylinder Liners
No. of cylinders bore X stroke: Lift: 3.9" X 2' 6" (2-100 X 750 mm) | HL930A Tilt: 4.3" X 1' 8" (110 X 510 mm)
Lift Cylinders
Type: Double acting
Cycle Time
Raise: 5.8 sec, Dump: 1.5 sec | Lower: 3.6 sec, Total: 10.9 sec
Features
Lift Circuit: The valve has four functions; raise, hold, lower and float can adjust automatic kickout from horizontal to full lift. | Tilt Circuit: The valve has three functions: tilt back, hold and dump. Can adjust automatic bucket positioner to desired load angle.
Dimensions
Dimensions
Hinge Pin Height at Carry Position: 1' 4" (405 mm) | Lift Arm Clearance at Maximum Lift: 10' 3" (3,125 mm) | Dump Clearance at Maximum Lift and 45° Discharge: 8' 10" (2,700 mm) | Reach at Maximum Lift and 45° Discharge: 3' 6" (1,065 mm) | Dump Angle at Maximum Lift and Dump (on Stops): (48°) | Roll Back Angle Ground: (42°) | Carry (47°) | Clearance Circle (Diameter) to Outside of Tires:34' 8" (10,555 mm) | Clearance Circle (Diameter) to Inside of Tires: 18' 9" (5,710 mm)
Bore
99 mm (3.89")
Stroke
110 mm (4.33")
Ground Clearance
1' 3" (370 mm)
Wheelbase
9' 6" (2,900 mm)
Overall Length
(Without Bucket): 19' 12" (6,090 mm)
Length
Shipping (With Bucket Level on Ground): 23' 5" (7,125 mm)
Overall Width
(with bucket): 8' 0" (2,450 mm)
Width
Over Tires (Unloaded): 7' 10" (2,375 mm) | Tread: 6' 4" (1,930 mm)
Overall Height
Height
to Top of Exhaust Pipe: 9' 8'' (2,945 mm) | to Top of Cabin: 10' 5" (3,170 mm) | to Top of Product Link Antenna: 10' 7" (3,235 mm) | to Top of Warning Beacon: 10' 10" (3,300 mm) | Hinge Pin at Maximum Lift: 11' 11" (3,640 mm)
Capacities
Fuel Capacity
tank: 50 US gal (189.5 )
Cooling System
engine: 8.3 US gal (31.5 )
Oil capacity
engine: 23.7 L (6.3 gal)
Axle Capacity, Front
6.1 US gal (23.0 )
Axle Capacity, Rear
6.1 US gal (23.0 )
Hydraulic Capacity
tank: 23.8 US gal (90.0 ) | System: 34.3 US gal (130.0 ) | DEF Tank: 5.0 US gal (19.0 ) | Crankcase: 2.9 US gal (31.0 ) | Transmission: 9.1 US gal (34.5 )
Cargo Capacity
Heaped: 1.90 m3 (2.50 yd3) | Struck: 1.60 m3 (2.10 yd3)
Load Capacity, Land
Tipping: Straight: 9,350 kg (20,615 lbs) | Full: 8,220 kg (18,125 lbs)
Weights
Weight, In Running Order
Operating: 11,610 kg (25,595 lbs) | Breakout force-bucket: 9,150 kg (20,175 lbs)
Features
Features
Steering: Center-point frame articulation. Tilt and telescopic steering column. | Mount: Rigid front axle and oscillating rear axle | Front Axle: Fixed | Rear Axle Oscillation: Oscillating ±12°degrees | Hub Reduction: Planetary reduction at wheel end | Hydraulic: Locking Front / Conventional Rear | Reduction Ratio: 21.533 | Control valve: 2 spool (Bucket, Boom) / 3 spool (Bucket, Boom, Aux)