2023 Hyundai Construction Equipment Tool Master Wheel Loaders HL955A TM

Information

2023 Hyundai Construction Equipment Tool Master Wheel Loaders HL955A TM

Hyundai HL900 series wheel loaders deliver maximum performance, productivity and efficiency, and have been proven to deliver as much as 5-percent greater productivity and 10-percent lower fuel consumption than previous models. Add a long list of Hyundai innovations – including an accurate onboard weighing system, unique bucket design for better load retention, and free use of Hyundai’s Hi MATE cellular based remote management system for five years – and you’ll find the HL900 series offers unbeatable value.

Features may include:

RELIABILITY
  • Hyundai construction equipment is precision designed with trusted and proven components and systems from leading OEM’s. The HL940TM is designed to be rugged and reliable for longer up time, reduced operating cost and improved productivity.
DURABILITY
  • Hyundai construction equipment is manufactured with the highest grade of steel due to Hyundai’s dominance in the steel and shipbuilding industries. Rigid cycle testing, heat testing, vibration testing and shock load testing is conducted in the design and manufacturing process of all new models insuring optimum durability and reliability.

Photos

Highlights

  • Brandon, Manitoba
  • 2023
  • Hyundai Construction Equipment
  • Tool Master Wheel Loaders HL955A TM
  • Torque Converter: 3-element, single-stage, single-phase
  • Available
  • Bucket pivot max.: 4,010 mm (12' 11.1") | Over exhaust: 3,273 mm (10' 8.9") | over cab: 3,390 mm (11' 1") | Dumping clearance at max. and 45° dump angle: 2,840 mm (9' 4")

Specifications

  • 2023
  • Hyundai Construction Equipment
  • Tool Master Wheel Loaders
  • HL955A TM
  • Compact
  • CUMMINS / QSB6.7
  • Gross power: 200 HP (149 kW) / 2,200 rpm | Net power: 156 HP (116 kW) / 2,100 rpm197 HP (147 kW) / 2,200 rpm
  • Water-cooled, 4-cycle, turbocharged air-cooled, direct-injection electronically controlled diesel engine
  • No. of cylinders bore X stroke Lift: 2-125mm (4.9") x 745mm (29.3") | Tilt: 2-110mm (4.3") x 755mm (29.7")
  • 17.3: 1
  • 95 kg.m (685 lb·ft) / 1,400 rpm
  • 6.7 l (409 in3 )
  • Dry, 2-stage dual elements
  • Torque Converter: 3-element, single-stage, single-phase
  • 235 kgf/cm2 (3,340 psi)
  • Type Load sensing hydrostatic articulated steering
  • Hydraulically actuated, wet disc brakes actuate all 4 wheels independent axle-by-axle system. Self adjusting & wheel speed brake. | Travel: Four-wheel, Outboard, wet-disc type, full hydraulic | Emergency: When brake oil pressure drops, indicator light alerts operator and parking brake automatically applies
  • Spring-applied, hydraulically released brake
  • 40°
  • 40°
  • Type Tubeless, loader design tires
  • Standard: 20.5 R25, L3
  • Standard: 20.5 R25, L3
  • 2 x 12 V – 160 Ah, 900 CCA
  • 24 V - 95 Amp
  • 24 V - 7.8 kW
  • Max. drawball pull: 11,400 kgf (25,100 lbf)
  • Swing: 9.7 rpm
  • Forward km/h (mph): 1st: 6.9 (4.3) - 6.4 (4.0) / 2nd: 11.4 (7.1) - 11.1 (6.9) / 3rd: 23.0 (14.3) - 17.1 (10.6) / 4th: 38.5 (23.9) - 26.6 (16.5) / 5th: - 40.0 (24.9) | Reverse: 1st: 7.3 (4.5) - 6.7 (4.2) / 2nd: 12.0 (7.5) - 11.7 (7.3) / 3rd: 24.3 (15.1) - 28.0 (17.4)
  • Four-wheel drive system
  • Operator sound pressure (ISO 6396:2008): 60 dB(A) | Exterior sound power (ISO 6395:2008): 102 dB(A)
  • Load-sensing hydraulic system | Steering: Load-sensing hydrostatic articulated steering
  • Variable-displacement piston pump, 185 l/min (49 gpm) | Steering: Variable-displacement piston pump, 109 l/min (29 gpm)
  • Rated output flow: 149 l/min (39.4 gpm)
  • 280 kgf/cm2 (3,980 psi) | 3rd Function Auxiliary Control: 30 kgf / cm2 (427 psi)
  • Raise: 5.8 sec | Dump: 2.0 sec | Lower: 3.9 sec | Total: 11.7 sec
  • Steering: Center-point frame articulation. Tilt and telescopic steering column. | Mount: Rigid front axle and oscillating rear axle | Front Axle: Fixed | Rear Axle Oscillation: ±11° center pin-loaded | Hub Reduction: Planetary reduction at wheel end | Diferential: Conventional | Reduction Ratio: 23.680 | Control valve: 2 spool (Bucket, Boom) / 3 spool (Bucket, Boom, Aux)
  • Front overhang: 2,625 mm (8' 7.3") | Rollback angle on ground: 43° | at carry: 54° | Dump angle: 50° | Clearance circle, over bucket (carry position): 12,250 mm (40'2") | Clearance circle, outside of tires: 11,014 mm (36'1") | Clearance circle, inside of tires: 5,854 mm (19'2") | Reach Full lift: 1,315 mm (4' 8") / 2,134 mm (7 feet): 1,815 mm (5' 11") | Digging depth: 100 mm (3.9")
  • 107 mm (4.21”)
  • 124 mm (4.88”)
  • 410 mm (1' 4")
  • 3,050 mm (10' 0.1")
  • Overall length on ground: 7,830 mm (25' 8") | at carry: 7,570 mm (24' 10")
  • 2,740 mm (9' 0") | with bucket: 2,580 mm (8'6")
  • (Fully raised): 5,410 mm (17' 7.8")
  • Bucket pivot max.: 4,010 mm (12' 11.1") | Over exhaust: 3,273 mm (10' 8.9") | over cab: 3,390 mm (11' 1") | Dumping clearance at max. and 45° dump angle: 2,840 mm (9' 4")
  • tank: 250 l (66 gal)
  • engine: 34 l (9.0 gal)
  • 32 l (8.5 gal)
  • 24 l (6.3 gal)
  • tank: 108 l (28.5 gal) | System: 188 l (49.7 gal) | DEF Tank: 27 l (7.1 gal) | Crankcase: 18.0 l (4.8 gal) | Transmission: 33 l (8.7 gal)
  • Heaped: 2.7 m3 (3.5 yd3 ) | Struck: 2.3 m3 (3.0 yd3 ) | Earth/clay: 1.5~1.7 tons / m3 (2,528~2,865 lb / yd3 ) | Sand and gravel: 1.5~1.7 tons / m3 (2,528~2,865 lb / yd3 ) | Aggregate 25~76 mm (1" to 3"): 1.6~1.7 tons / m3 (2,697~2,865 lb / yd3 ) | 19 mm (3") and larger: 1.8 tons / m3 (3,034 lb / yd3 )
  • Tipping: Straight: 10,310 kg (22,730 lbs) | Full Turn: 8,850 kg (19,510 lbs)
  • Operating: 15,600 kg (34,390 lbs) | Breakout force-bucket: 12,800 kg (28,220 lbs)