2023 Hyundai Construction Equipment Tool Master Wheel Loaders HL955A TM
- Year 2023
- Make Hyundai Construction Equipment
- Model Tool Master Wheel Loaders
2023 Hyundai Construction Equipment Tool Master Wheel Loaders HL955A TM
2023 Hyundai Construction Equipment Tool Master Wheel Loaders HL955A TM
Hyundai HL900 series wheel loaders deliver maximum performance, productivity and efficiency, and have been proven to deliver as much as 5-percent greater productivity and 10-percent lower fuel consumption than previous models. Add a long list of Hyundai innovations – including an accurate onboard weighing system, unique bucket design for better load retention, and free use of Hyundai’s Hi MATE cellular based remote management system for five years – and you’ll find the HL900 series offers unbeatable value.
Features may include:
RELIABILITY- Hyundai construction equipment is precision designed with trusted and proven components and systems from leading OEM’s. The HL940TM is designed to be rugged and reliable for longer up time, reduced operating cost and improved productivity.
- Hyundai construction equipment is manufactured with the highest grade of steel due to Hyundai’s dominance in the steel and shipbuilding industries. Rigid cycle testing, heat testing, vibration testing and shock load testing is conducted in the design and manufacturing process of all new models insuring optimum durability and reliability.
Engine
Engine Manufacturer
CUMMINS / QSB6.7
Engine Power
Gross power: 200 HP (149 kW) / 2,200 rpm | Net power: 156 HP (116 kW) / 2,100 rpm197 HP (147 kW) / 2,200 rpm
Engine Type
Water-cooled, 4-cycle, turbocharged air-cooled, direct-injection electronically controlled diesel engine
Cylinder Liners
6 cylinders in line
Compression Ratio
17.3: 1
Engine Torque, Maximum
95 kg.m (685 lb·ft) / 1,400 rpm
Displacement
6.7 l (409 in3 )
Air Cleaner
Dry, 2-stage dual elements
Drivetrain
Transmission
Torque Converter: 3-element, single-stage, single-phase
Relief Valve Setting
235 kgf/cm2 (3,340 psi)
Steering
Type Load sensing hydrostatic articulated steering
Cylinder Liners
Double acting: 2-65 mm (2.6") x 418 mm (16.5")
Brakes
Brake System Type
Hydraulically actuated, wet disc brakes actuate all 4 wheels independent axle-by-axle system. Self adjusting & wheel speed brake. | Travel: Four-wheel, Outboard, wet-disc type, full hydraulic | Emergency: When brake oil pressure drops, indicator light alerts operator and parking brake automatically applies
Parking Brake
Spring-applied, hydraulically released brake
Steering Angle, Left
40°
Steering Angle, Right
40°
Wheels & Tires
Wheels
Type Tubeless, loader design tires
Tires, Front Specification
Standard: 20.5 R25, L3
Tires, Rear Specification
Standard: 20.5 R25, L3
Battery
Battery
2 x 12 V – 160 Ah, 900 CCA
Electric
Alternator
24 V - 95 Amp
Starter
24 V - 7.8 kW
Operational
Operating Conditions
Max. drawball pull: 11,400 kgf (25,100 lbf)
Operating Speed
Swing: 9.7 rpm
Top Speed
Forward km/h (mph): 1st: 6.9 (4.3) - 6.4 (4.0) / 2nd: 11.4 (7.1) - 11.1 (6.9) / 3rd: 23.0 (14.3) - 17.1 (10.6) / 4th: 38.5 (23.9) - 26.6 (16.5) / 5th: - 40.0 (24.9) | Reverse: 1st: 7.3 (4.5) - 6.7 (4.2) / 2nd: 12.0 (7.5) - 11.7 (7.3) / 3rd: 24.3 (15.1) - 28.0 (17.4)
Drive System
Four-wheel drive system
Performance
Noise Level
Operator sound pressure (ISO 6396:2008): 60 dB(A) | Exterior sound power (ISO 6395:2008): 102 dB(A)
Hydraulics
Hydraulic Type
Load-sensing hydraulic system | Steering: Load-sensing hydrostatic articulated steering
Hydraulic Pump
Variable-displacement piston pump, 185 l/min (49 gpm) | Steering: Variable-displacement piston pump, 109 l/min (29 gpm)
Hydraulic Flow
Rated output flow: 149 l/min (39.4 gpm)
Maximum Pressure
280 kgf/cm2 (3,980 psi) | 3rd Function Auxiliary Control: 30 kgf / cm2 (427 psi)
Cylinder Liners
No. of cylinders bore X stroke Lift: 2-125mm (4.9") x 745mm (29.3") | Tilt: 2-110mm (4.3") x 755mm (29.7")
Cycle Time
Raise: 5.8 sec | Dump: 2.0 sec | Lower: 3.9 sec | Total: 11.7 sec
Features
Lift Circuit: The valve has four functions; raise, hold, lower and float can adjust automatic kickout from horizontal to full lift. | Tilt Circuit: The valve has three functions: tilt back, hold and dump. Can adjust automatic bucket positioner to desired load angle.
Dimensions
Dimensions
Front overhang: 2,625 mm (8' 7.3") | Rollback angle on ground: 43° | at carry: 54° | Dump angle: 50° | Clearance circle, over bucket (carry position): 12,250 mm (40'2") | Clearance circle, outside of tires: 11,014 mm (36'1") | Clearance circle, inside of tires: 5,854 mm (19'2") | Reach Full lift: 1,315 mm (4' 8") / 2,134 mm (7 feet): 1,815 mm (5' 11") | Digging depth: 100 mm (3.9")
Bore
107 mm (4.21”)
Stroke
124 mm (4.88”)
Ground Clearance
410 mm (1' 4")
Wheelbase
3,050 mm (10' 0.1")
Overall Length
Overall length on ground: 7,830 mm (25' 8") | at carry: 7,570 mm (24' 10")
Overall Width
2,740 mm (9' 0") | with bucket: 2,580 mm (8'6")
Overall Height
(Fully raised): 5,410 mm (17' 7.8")
Height
Bucket pivot max.: 4,010 mm (12' 11.1") | Over exhaust: 3,273 mm (10' 8.9") | over cab: 3,390 mm (11' 1") | Dumping clearance at max. and 45° dump angle: 2,840 mm (9' 4")
Capacities
Fuel Capacity
tank: 250 l (66 gal)
Cooling System
engine: 34 l (9.0 gal)
Axle Capacity, Front
32 l (8.5 gal)
Axle Capacity, Rear
24 l (6.3 gal)
Hydraulic Capacity
tank: 108 l (28.5 gal) | System: 188 l (49.7 gal) | DEF Tank: 27 l (7.1 gal) | Crankcase: 18.0 l (4.8 gal) | Transmission: 33 l (8.7 gal)
Cargo Capacity
Heaped: 2.7 m3 (3.5 yd3 ) | Struck: 2.3 m3 (3.0 yd3 ) | Earth/clay: 1.5~1.7 tons / m3 (2,528~2,865 lb / yd3 ) | Sand and gravel: 1.5~1.7 tons / m3 (2,528~2,865 lb / yd3 ) | Aggregate 25~76 mm (1" to 3"): 1.6~1.7 tons / m3 (2,697~2,865 lb / yd3 ) | 19 mm (3") and larger: 1.8 tons / m3 (3,034 lb / yd3 )
Load Capacity, Land
Tipping: Straight: 10,310 kg (22,730 lbs) | Full Turn: 8,850 kg (19,510 lbs)
Weights
Weight, In Running Order
Operating: 15,600 kg (34,390 lbs) | Breakout force-bucket: 12,800 kg (28,220 lbs)
Features
Features
Steering: Center-point frame articulation. Tilt and telescopic steering column. | Mount: Rigid front axle and oscillating rear axle | Front Axle: Fixed | Rear Axle Oscillation: ±11° center pin-loaded | Hub Reduction: Planetary reduction at wheel end | Diferential: Conventional | Reduction Ratio: 23.680 | Control valve: 2 spool (Bucket, Boom) / 3 spool (Bucket, Boom, Aux)