2023 Hyundai Construction Equipment Tool Master Wheel Loaders HL930A TM

Information

2023 Hyundai Construction Equipment Tool Master Wheel Loaders HL930A TM

Hyundai HL900 series wheel loaders deliver maximum performance, productivity and efficiency, and have been proven to deliver as much as 5-percent greater productivity and 10-percent lower fuel consumption than previous models. Add a long list of Hyundai innovations – including an accurate onboard weighing system, unique bucket design for better load retention, and free use of Hyundai’s Hi-Mate cellular based remote management system for five years – and you’ll find the HL900 series offers unbeatable value.

Features may include:

RELIABILITY
  • Hyundai construction equipment is precision designed with trusted and proven components and systems from leading OEM’s. The HL940TM is designed to be rugged and reliable for longer up time, reduced operating cost and improved productivity.
DURABILITY
  • Hyundai construction equipment is manufactured with the highest grade of steel due to Hyundai’s dominance in the steel and shipbuilding industries. Rigid cycle testing, heat testing, vibration testing and shock load testing is conducted in the design and manufacturing process of all new models insuring optimum durability and reliability.
  • Hyundai’s improved bucket design features an innovative wider opening, curved side plates, and enhanced spill guard to maximize bucket capacity and reduce material loss when traveling. Durability is enhanced through the use of wear-resistant HARDOX 400 grade steel in key structural areas of the bucket

Photos

Highlights

  • Brandon, Manitoba
  • 2023
  • Hyundai Construction Equipment
  • Tool Master Wheel Loaders HL930A TM
  • Torque Converter: Single-stage, single-phase
  • Available
  • Bucket pivot max.: 3,980 mm (13' 1") | Over exhaust: 3,245 mm (10' 7.8") | over cab: 3,300 mm (10' 9.9") | Dumping clearance at max. and 45° dump angle: 2,840 mm (9' 3")

Specifications

  • 2023
  • Hyundai Construction Equipment
  • Tool Master Wheel Loaders
  • HL930A TM
  • Compact
  • CUMMINS / B6.7
  • Gross power: 156 HP (118 kW) / 2,200 rpm | Net power: 154 HP (116 kW) / 2,200 rpm
  • Water-cooled, 4-cycle, turbocharged air-cooled, direct-injection, electronically controlled diesel engine
  • Tier 4F/ Stage V Emission Certified
  • No. of cylinders bore X stroke Lift: 2-110 mm x 738 mm (4.3"x 29.1") | HL940A TM Tilt: 2- 95 mm x 745 mm (3.6"x 29.3")
  • 17.3: 1
  • 76 kg·m (550 lb·ft) / 1,300 rpm
  • 6.7 L (408 cu in)
  • Dry, 2-stage dual elements
  • Torque Converter: Single-stage, single-phase
  • 210 kgf/cm2 (2,987 psi)
  • Type Load sensing hydrostatic articulated steering
  • Hydraulically actuated, wet disc brakes actuate all 4 wheels independent axle-by-axle system. Self adjusting & wheel speed brake. | Travel: Four-wheel, Outboard, wet-disc type, full hydraulic | Emergency: When brake oil pressure drops, indicator light alerts operator and parking brake automatically applies
  • Spring-applied, hydraulically released brake
  • 40°
  • 40°
  • Type Tubeless, loader design tires
  • Standard: 20.5-25, 16PR, L3
  • Standard: 20.5-25, 16PR, L3
  • 2 x 12 V - 120 Ah, 850 CCA
  • 24 V - 95 Amp
  • 24 V - 7.8 kW
  • Max. drawball pull: 11,400 kgf (25,100 lbf)
  • Swing: 9.7 rpm
  • Forward km/h (mph): 1st: 6.9 (4.3) / 2nd: 12.7 (7.9) / 3rd: 24.9 (15.5) / 4th: 40 (24.9) | Reverse: 1st: 7.3 (4.5) / 2nd: 13.4 (8.3) / 3rd: 26.1 (16.2)
  • Four-wheel drive system
  • Operator sound pressure (ISO 6396:2008): 60 dB(A) | Exterior sound power (ISO 6395:2008): 102 dB(A)
  • Variable piston pump | Steering: Load-sensing hydrostatic articulated steering
  • tank: 90 l (23.8 gal) | System: 130 l (34.0 gal) | DEF Tank: 19 l (5.0 gal) | Crankcase: 18.0 l (4.8 gal) | Transmission: 25 (6.6 gal)
  • Variable-displacement piston pump 149 l/min (39.4 gpm) | Steering: Variable-displacement piston pump 149 l/min (39 gpm)
  • Rated output flow: 149 l/min (39.4 gpm)
  • 280 kgf / cm2 (3,980 psi) @ 2,230 rpm | 3rd Function Auxiliary Control: 30 kgf / cm2 (427 psi)
  • Raise: 5.5 sec | Dump: 1.6 sec | Lower: 3.0 sec | Total: 10.1 sec
  • Steering: Center-point frame articulation. Tilt and telescopic steering column. | Mount: Rigid front axle and oscillating rear axle | Front Axle: Fixed | Rear Axle Oscillation: ±12° (total 24°) | Hub Reduction: Planetary reduction at wheel end | Diferential: Conventional | Reduction Ratio: 21.53 | Control valve: 2 spool (Bucket, Boom) / 3 spool (Bucket, Boom, Aux)
  • Front overhang: 2,480 mm (8' 1.6") | Rollback angle on ground at carry: 42° | Dump angle: 50° | Clearance circle, over bucket (carry position): 11,676 mm (38' 3.7") | Clearance circle, outside of tires: 10,671 mm (35') | Clearance circle, inside of tires: 5,814 mm (19' 8") | Reach Full lift: 1,380 mm (4' 6") / 2,134 mm (7 feet): 1,805 mm (5.11") | Digging depth: 100 mm (3.9")
  • 107 mm (4.21”)
  • 124 mm (4.88”)
  • 417 mm (1' 4.4")
  • 3,000 mm (9' 10")
  • Overall length on ground: 7,805 mm (25' 7")
  • 2,450 mm (8') | with bucket: 2,540 mm (8' 4)
  • (Fully raised): 5,265 mm (17' 3")
  • Bucket pivot max.: 3,980 mm (13' 1") | Over exhaust: 3,245 mm (10' 7.8") | over cab: 3,300 mm (10' 9.9") | Dumping clearance at max. and 45° dump angle: 2,840 mm (9' 3")
  • tank: 220 l (58 gal)
  • engine: 34 l (9.0 gal)
  • engine: 23.7 L (6.3 gal)
  • 24 l (6.3 gal)
  • 24 l (6.3 gal)
  • Heaped: 2.3 m3 (3.0 yd3 ) | Struck: 2.0 m3 (2.62 yd3 ) | Earth/clay: 1.5~1.7 tons / m3 (2,528~2,865 lb / yd3 ) | Sand and gravel: 1.5~1.7 tons / m3 (2,528~2,865 lb / yd3 ) | Aggregate 25~76 mm (1" to 3"): 1.6~1.7 tons / m3 (2,697~2,865 lb / yd3 ) | 19 mm (3") and larger: 1.8 tons / m3 (3,034 lb / yd3 )
  • Tipping: Straight: 8,600 kg (18,960 lbs) | Full Turn: 7,400 kg (16,310 lbs)
  • Operating: 13,900 kg (30,645 lbs) | Breakout force-bucket: 10,830 kg (23,880 lbs)