2024 New Holland Construction Skid Steer Loaders L316

Information

2024 New Holland Construction Skid Steer Loaders L316

Meet your challenges head-on with 300 Series skid steer loaders from New Holland. Whether you work in construction, municipal road maintenance, landscaping or farming, these loaders are designed to make your workday more productive and comfortable.

Features may include:

Powerful performance
  • New Holland Tier 4 Final engines use less fuel while still delivering powerful 60 HP (45 kW) performance to the L316. The reliable hydraulic system delivers fast cycle times, raising in just 3.2 seconds and lowering in only two seconds. In-line hydraulic pumps produce less noise and provide extra-smooth operation.
Save time between jobsites
  • The dual-range transmission on the L316 provides standard low-range travel speeds of nearly 8 mph (12.7 kph) and 139 lbs/ft (188 Nm) @1800 rpm of peak torque power to save time on and between job sites. New Holland’s long 37-inch (941 mm) wheelbase gives you stability and smooth riding comfort. Newly available creep mode on EH models provides greater control for slow-speed operations like trenching.
Dump Height and Reach
  • The L316's radial lift linkage provides a maximum 84.8 inches (2154 mm) of dump height and a maximum 18.5 inches (469 mm) in dump height reach, allowing you to precisely place loads in the center of high-sided truck boxes or hoppers.
Easy access, simplified service
  • Long service intervals and easy access to maintenance points reduce downtime and lost revenue. All daily service points are grouped together and the rear door and hood make it easy to access without tools. The entire cab and boom assembly tilts forward for unrivaled entry to components and easy cab cleanout.

Photos

Highlights

  • Brandon, Manitoba
  • 2024
  • New Holland Construction
  • Skid Steer Loaders L316
  • ISM / N844LT
  • Available
  • Tread width: 49.2 in (1248 mm) with 10” x 16.5” (254 x 419 mm)
  • with foundry/excavating bucket short lip: 2246 mm (88.4 in) | with low profile/standard lip bucket: 2154 mm (84.8 in) | Dump Height: 469 mm (18.5 in) | Rollback, bucket at full height, degrees: 95

Specifications

  • 2024
  • New Holland Construction
  • Skid Steer Loaders
  • L316
  • General
  • ISM / N844LT
  • Horsepower per SAE J1349 Gross: 45 kW (60 hp) @ 2800 rpm | Horsepower per SAE J1349 Net: 42 kW (57 hp) @ 2800 rpm
  • Peak: 188 Nm (139 lb-ft) @ 1800 rpm
  • 2.216 L (135.2 in3)
  • 84 mm (3.31 in)
  • 100 mm (3.94 in)
  • Turbocharged with external EGR
  • Indirect
  • Travel speed, low range: 12.7 km/h (7.9 mph)
  • Breakout force, lift cylinder: 14.1 kN (3160 lbs) Tip Limit | Breakout force, bucket cylinder: 18.6 kN (4180 lbs)
  • Pump flow, Standard Flow: 69.7 lpm (18.4 gpm)
  • Relief pressure: 210 bar (3046 psi)
  • Bucket hinge pin: 2845 mm (112 in) | Top of ROPS: 1919 mm (75.5 in) | Bottom of level bucket, fully raised: 2682 mm (105.6 in) | Dump angle, degrees: 40° | Rollback, bucket on ground, degrees: 26 | Angle of departure, degrees: 22 | Clearance circle without bucket: 1240 mm (48.8 in) | Clearance circle rear: 1433 mm (56.4 in) | Rear axle to bumper: 858 mm (33.8 in)
  • with foundry/excavating bucket short lip: 3591 mm (141.4 in) | with low profile/standard lip bucket: 3732 mm (146.9 in) | with low profile extended/long lip bucket: 3859 mm (152 in)
  • without attachment with coupler: 2435 mm (95.9 in) | with foundry excavation bucket on ground: 3028 mm (119.2 in) | with low profile bucket: 3175 mm (125 in) | with low profile extended bucket: 3297 mm (129.8 in)
  • with foundry/excavating bucket short lip: 2246 mm (88.4 in) | with low profile/standard lip bucket: 2154 mm (84.8 in) | Dump Height: 469 mm (18.5 in) | Rollback, bucket at full height, degrees: 95
  • 941 mm (37 in)
  • (bottom of belly pan): 178 mm (7 in)
  • 1518 mm (59.8 in)
  • Tread width: 49.2 in (1248 mm) with 10” x 16.5” (254 x 419 mm)
  • Rated operating load, 50% tip: 725 kg (1600 lbs) | Tipping load: 1455 kg (3200 lbs)
  • 2560 kg (5645 lbs)
  • 2370 kg (5210 lbs)