Mazergroup

  • 1908 Currie Blvd
  • Brandon, MB R7B 4E7
  • Call Us: (204) 728-2244
  • https://www.mazergroup.ca/
Print This Page

2024 New Holland Construction Loader Backhoes B95D Tool Carrier

Information

2024 New Holland Construction Loader Backhoes B95D Tool Carrier

Businesses from agriculture to horticulture, landscaping to drainage and irrigation need multiskilled and cost-effective equipment. The digging and lifting capabilities of a New Holland D Series loader backhoe leave no room for compromising on performance. Built-in versatility, prioritized operator comfort and the advanced Tier 4 Final engine all work to prove how models B95D, B95D Tool Carrier (TC), B95D Long Reach (LR) will be one investment that never comes up short of work.

Features may include:

REACH FOR IT ALL

  • Jobsite domination is at arm's length using the 20 ft 8 in feet (6286 mm) of overall reach on the B95D and TC models. Reaching for the stars? Check out model B95D LR with a standard overall reach of 19 ft 3 in (5853 mm) and 22 ft 4 in (6814 mm) when extended. Tower over the competitors with the standard maximum operating height of nearly 20 ft (6055-6285 mm) on the backhoe and 14 ft 5 in (4400 mm) of maximum loader operating height using the 1.1 cu yd Heavy-Duty General Purpose bucket.

DEFINED BY VERSATILITY

  • The reliable hydraulic system on B95D models delivers fast cycle times in the wink of an eye, raising a 1.3 cy yd Heavy-Duty General Purpose bucket to full height in 3.7 sec, lowering in 2.70 sec and a 1.90 sec dump time. D Series loader backhoe models deliver exceptional performance with just a single attachment, while the front loader can be fitted to meet your needs with a 1.3 cu. yd. standard bucket, a 4x1 or 6x1 bucket. The backhoe can be equipped with a variety of attachments, such as a hydraulic breaker, auger, or thumb; and loader attachments such as a sweeper broom, fork, scrap grapple or claw, to match a wide range of worksite demands.

POWERSHIFT OR POWERSHUTTLE, IT'S YOUR CHOICE

  • D Series loader backhoes come with switchable two- or four-wheel-drive, a powershuttle forward/reverse mechanical transmission, or the automatic PowerShiftTM transmission. All PowerShift models now feature a convenient F-N-R switch on the front loader multifunction lever.

Photos

Highlights

  • Brandon, Manitoba
  • 2024
  • New Holland Construction
  • Loader Backhoes B95D Tool Carrier
  • Synchromesh
  • Available
  • Blade: 2248 mm (7'5")
  • Max operating height: 5425 mm (17' 10") Standard

Specifications

  • 2024
  • New Holland Construction
  • Loader Backhoes
  • B95D Tool Carrier
  • General
  • F5BFL413B*B003
  • Tier 4 Final certified, Diesel Oxidation Catalyst with Urea Dosing Module and Selective Catalytic Reduction, HPCR, 4-cycle diesel
  • 4
  • 3.4 L (207 cu.in.)
  • gross: 55 kW (74 HP) | net: 71 kW (95 HP) | Peak torque: 338 lb-ft (458 Nm) @ 1400
  • 2200 rpm
  • 4F / 4R
  • Synchromesh
  • Less brakes, split brakes
  • 160 amps
  • 36.2 kph (22.5 mph)
  • Stabilizer spread, operating: 3226 mm (10' 7") | Max grading angle: 116 degrees | Max. bucket rotation: 204 degrees
  • Blade: 2248 mm (7'5")
  • Max operating height: 5425 mm (17' 10") Standard
  • 50.7 L (13.4 gal.)
  • Bucket digging force: 12,933 lbs (5866 kg), 12,933 lbs (5866 kg), 12,933 lbs (5866 kg) | Crowd digging force: 8588 lbs (3895 kg), 8100 lbs (3674 kg), 5782 lbs (2623 kg) | Boom lift @ -8 ft. (-2.4 m): 3228 lbs (1467 kg), 2732 lbs (1242 kg), 2329 lbs (1058 kg) | Dipper lift @ +10 ft (+3 m): 5342 lbs (2423 kg), 5831 lbs (2645 kg), 3885 lbs (1762 kg)
  • Base Unit (4WD, Cab): 17,703 lbs