Mazergroup

  • 1908 Currie Blvd
  • Brandon, MB R7B 4E7
  • Call Us: (204) 728-2244
  • https://www.mazergroup.ca/
Print This Page

2024 New Holland Construction Compact Track Loaders C334

Information

2024 New Holland Construction Compact Track Loaders C334

300 Series compact track loaders are reliable workhorses that deliver high performance in all conditions. Model C334 builds on the strength, visibility, power and smooth ride you’ve come to expect from New Holland CTLs with the addition of key enhancements that improve durability, operating ease and overall productivity.

Features may include:

POWER THROUGH TOUGH JOBS

  • The reliable hydraulic system of the C334 delivers fast cycle times, raising in just 4.5 seconds and lowering in only 3.4 seconds, in addition to producing less noise and providing extra-smooth operation due to in-line hydraulic pumps. New Holland Tier 4 Final engines deliver powerful performance, use less fuel, are easy to maintain - decreasing operating costs - and still deliver powerful 90 HP (67 kW) performance to the C334.

SMOOTH RIDE, EXTENDED LIFE

  • The low-profile track undercarriage of the C334 that provides 9.6 inches (244 mm) of ground clearance makes cleanout a breeze, reduces noise and increases durability. The loader also yields a smoother ride with 64.5 inches (1639 mm) of track on ground, thanks to steel-embedded tracks rolling on the rubber instead of steel. Fewer moving parts than competitive designs mean less complexity and complications, all adding up to longer track life.

LIFT AND CARRY OPERATIONS

  • The radial lift linkage delivers up to 24.6 inches (625 mm) of dump height reach and a maximum dump height of nearly 100 inches (2537 mm) to precisely place loads in the center of high-sided truck boxes or hoppers. With a full rated operating load of 6,800 lbs (3084 kg), 3,400 lbs (1542 kg) at 50% tip and 2,380 lbs (955 kg) at 35% tip, the C334 is optimized for lift-and-carry operations, allowing operators to load material with precision and confidence.?

8” LCD MULTIFUNCTION DISPLAY MAKES OPERATION EASIER

  • The LCD display with an integrated back-up camera helps you operate a 300 Series loader with greater ease and confidence. At 8 inches in size and mounted conveniently on the right forward post, the LCD display puts all the information and tools for greater productivity right where you need it. The display provides key operation data, including engine and performance information, RPM, fuel level, battery voltage, hydraulic oil temperature, engine temperature, and trip screen. The integrated backup camera increases visibility to the rear of the loader, improving operator efficiency and safety. You can set the camera for “always on” or to engage only when shifting the loader into reverse gear.

WIDE, COMFORTABLE CAB WITH SUPERIOR VISIBILITY

  • New Holland 300 Series loaders make comfort a priority to boost productivity on the job. More comfort starts with the cab itself, one of the widest in the industry, so it's easy to enter and exit. Full-covering trim absorbs noise, and the visibility panel on the cab roof gives you a clear view in all directions, even to the raised bucket or attachments. The fully sealed and pressurized cab minimizes dust and exhaust infiltration.

Photos

Highlights

  • Brandon, Manitoba
  • 2024
  • New Holland Construction
  • Compact Track Loaders C334
  • Available
  • Bucket hinge pin: 3215 mm (126.5 in) | Top of ROPS: 2043 mm (80.4 in) | Bottom of level bucket, fully raised: 3016 mm (118.7 in)Dump reach (max height): 548 mm (21.6 in) @ 38.1° | with foundry/excavating bucket short lip: 102.4 2602 mm (102.4 in) @ 38.3° | with low profile/standard lip bucket: 2537 mm (99.9 in) @ 38.1°

Specifications

  • 2024
  • New Holland Construction
  • Compact Track Loaders
  • C334
  • Compact
  • FPT / F5BFL413E*B002
  • Horsepower per SAE J1349 Gross: 67 kW (90 hp) @ 2500 rpm | Horsepower per SAE J1349 Net: 63 kW (84 hp) @ 2500 rpm
  • 3.4 L (207.5 in3)
  • Peak: 383 Nm (282 lb-ft) @ 1400 rpm
  • 99 mm (3.9 in)
  • 110 mm (4.3 in)
  • Air intake: Turbocharged Aftercooled with external EGR
  • HPCR Direct
  • Travel speed, low range: 8.2 km/h (5.1 mph)
  • Breakout Force, lift cylinder: 34.5 kN (7760 lbs) Breakout force bucket cylinder: 38.7 kN (8700 lbs)
  • (with spec belt): 5.9 PSI
  • Pump Flow: 91.5 Lpm (24.2 gpm) | Enhanced High Flow: 132.5 Lpm (35 gpm)
  • Relief Pressure: 210 bar (3046 psi)
  • Bucket hinge pin: 3215 mm (126.5 in) | Top of ROPS: 2043 mm (80.4 in) | Bottom of level bucket, fully raised: 3016 mm (118.7 in) | Dump angle, degrees: 38.1° | Rollback, bucket on ground, degrees: 30.6° | Rollback, bucket at full height, degrees: 100° | Track on ground: 1639 mm (64.5 in) | Angle of departure, degrees: 32° | Clearance circle without bucket: 1466 mm (57.7 in) | Clearance circle rear: 1725 mm (67.9 in) | Clearance circle with foundry bucket in carry position: 2210 mm (87 in) with 78” (1981 mm) bucket | Clearance circle with low profile bucket on ground: 2307 mm with 78” (1981 mm) bucket | Clearance circle with extended low profile on ground: 2419 mm with 78” (1981 mm) bucket | Track gauge: 1480 mm (58.3 in)
  • without attachment with coupler: 3003 mm (118.2 in) | with foundry excavation bucket on ground: 3621 mm (142.6 in) | with low profile bucket>: 2749 mm (141.5 in) | with low profile extended bucket: 3853 mm (151.7 in)
  • Bucket hinge pin: 3215 mm (126.5 in) | Top of ROPS: 2043 mm (80.4 in) | Bottom of level bucket, fully raised: 3016 mm (118.7 in)Dump reach (max height): 548 mm (21.6 in) @ 38.1° | with foundry/excavating bucket short lip: 102.4 2602 mm (102.4 in) @ 38.3° | with low profile/standard lip bucket: 2537 mm (99.9 in) @ 38.1°
  • (bottom of belly pan): 243 mm (9.6 in)
  • 1943 mm (76.5 in)
  • with foundry/excavating bucket short lip: 3993 mm (157.2 in) | with low profile/standard lip bucket: 4099 mm (161.4 in) | with low profile extended/long lip bucket: 4221 mm (166.2 in)
  • System Capacity with filter: 44.5 L (47 qt)
  • 96.5 L (25.5 gal) | DEF tank: 10.7 L (2.8 gal)
  • Engine oil with filter: 8.5 L (8.9 qt)
  • 4536 kg (10,000 lbs)
  • 4380 kg (9656 lbs)